Production Capabilities
Heat Treatment
Machining
Valve Rubber Production
Product Specification & Model
Fluid End
Product Features
- Fluid-end assemblies for cementing and fracturing pumps.
- Cement Pump
- TWS600, HT400, etc.
- Frac Pump
- 2250, 2500, etc.
Valve
Product Features
- Alloy-steel construction with integrally forged and friction-welded variants.
- Special heat treatment combines surface hardness with core toughness.
- Surface hardness: HRC 58–61; core hardness: greater than HRC 40.
- Traceability from raw material to finished product.
- Cement Pump
- 3 in, 3.5 in
- Frac Pump (SPM, etc.)
- 4 in, 4.5 in (P4, P5)
- Q10-X
Valve Seat
Product Features
- Alloy steel with special heat treatment.
- Surface hardness of HRC 58–61 and core hardness greater than HRC 40 combine a hard surface with impact toughness.
- Material and production-batch traceability.
- Cement Pump
- 3 in, 3.5 in
- Frac Pump (SPM, etc.)
- 4 in, 4.5 in (P4, P5)
Valve Insert
Product Features
- Polyurethane material with precision CNC turning.
- Material tensile strength ≥55 MPa; Shore A hardness 95±2.
- Notched-crescent tear strength ≥125 kN/m.
- Compression set: 15% at 70°C for 23 h.
- Cement Pump
- 3 in, 3.5 in
- Frac Pump (SPM, etc.)
- 4 in, 4.5 in (P4, P5)
- Q10-X
Packing
Product Features
- Pressure rings use an aramid/carbon-fiber blend for strength, toughness and wear resistance.
- Header rings and wiper seals use HNBR.
- Cement Pump
- 3 in, 3.5 in, 4 in
- Frac Pump
- 3.75 in, 4 in, 4.5 in, 5 in
Plunger
Product Features
- Alloy-steel body with quenching and tempering.
- Ni62 or tungsten-carbide spray coating provides a wear-resistant surface.
- Cement Pump
- 3 in, 3.5 in, 4 in
- Frac Pump
- 3.75 in, 4 in, 4.5 in, 5 in
Valve Spring
Product Features
- SUS631 steel construction.
- Valve-assembly springs for cementing and fracturing pumps, available in multiple sizes.
Pressure Cover Seal
Product Features
- D-ring cover seals cast from PPDI polyurethane.
- Precision CNC turning, with strength and wear resistance.
Swivel Joint Repair Kit
Product Features
- Repair kits for swivel-joint maintenance.
- Nominal sizes: 2, 3 and 4 in.
- Nominal Size
- 2 in, 3 in, 4 in
Stuffing box rubber core
Product Features
- Rubber sealing element for stuffing boxes.
- Replaceable rubber-core construction.
Companion Seals
Discharge / Suction Cover O-Rings
Molded HNBR with strength and wear resistance for discharge and suction cover sealing.
D-Ring Cover Seals
D-ring cover seals cast from PPDI polyurethane. Precision CNC turning, with strength and wear resistance.
Provide the pump make/model, required product, size, quantity, destination, drawing/part number or clear reference photos.
Fluid end components: selection and ordering
Confirm the required part, mating configuration and operating conditions before ordering. Lead times, stock and documentation are confirmed for each order.
What information is required for a pump-component quotation?
Provide the pump manufacturer and model, fluid-end configuration, required component and installation position, drawing or part number, dimensions, quantity and destination. Include operating pressure, fluid, temperature and any special inspection requirements where available. Compatibility is confirmed against the technical references.
Can you supply individual parts or matched assemblies?
Individual replacement parts, matched component sets and complete fluid end assemblies can be reviewed against the requested scope. The quotation and packing list identify the included items and quantities. A valve body, valve insert or packing set does not automatically include the other components.
Can a pump brand or nominal size alone confirm compatibility?
No. Confirm the part number or drawing, actual dimensions, interfaces and installation position. For valves, seats and inserts, the mating designs must be checked together. Nominal size or pump brand alone is not a complete replacement specification.
What must be confirmed for plungers and packing?
For plungers, confirm diameter, working length, end connection, substrate and surface requirements. For packing, confirm the pump and stuffing-box configuration, plunger diameter, packing profile and required set composition. Material selection also requires the fluid, temperature, pressure and lubrication conditions.
Can products be customized?
Customization requests are reviewed against drawings, samples, part numbers or project specifications. Material, dimensions, interfaces, inspection requirements and the final supply scope must be confirmed before production.
What quality documents can be supplied?
Document availability and scope are agreed with the order. Depending on the product and inspection plan, records may include material identification, dimensional inspection, applicable test results, batch or item identification, and packing records. Specify any third-party or witnessed inspection requirements before the order is confirmed.
Are products available from the United States?
Selected 4.0-inch and 4.5-inch pump consumables may be supplied from the Katy, Texas warehouse. Confirm the exact part, compatibility, current batch, quantity and dispatch arrangements before ordering. Availability does not apply to every pump component.
How are lead times and sample arrangements confirmed?
Lead time is confirmed for each order according to the product, quantity, current stock and approved technical requirements. Sample availability, quantity, price and delivery are agreed separately. Please provide your required delivery date and destination with the inquiry.
What are the quotation and payment terms?
The quotation states the product configuration, quantity, pricing unit, currency, Incoterm, payment terms and delivery scope. Freight and export charges are identified according to the quoted terms. Where a product listing specifies an EXW price, freight and export costs are quoted separately.